Ather / Ola TPMS: fits the valve, not the badge Ather and Ola scooters are app-first products. A pressure sensor is useful to the rider, and more useful to the maker if the data can reach the app that is already installed.
Ask about your model See the sensorWhat this means on an Ather or Ola
The wheels are tubeless and take a valve-stem cap sensor: nothing on the wheel changes and there is no receiver. The interesting question for this class is integration - a scooter owner already has an app for charge, range and service, and a second app for tyre pressure is a friction point.
We can publish the pressure and temperature through a documented interface so the maker's own app displays it, and we do not require the rider to use ours. That is a project conversation, not a catalogue item.
The sensor, in numbers
| Item | Value |
|---|---|
| Radio | 2.4 GHz BLE 5.1 - no receiver, no wiring |
| Pressure range | 0–500 kPa gauge (0–600 kPa absolute) |
| Accuracy | ±2 kPa |
| Battery | CR1632, about 1.5 years at the default reporting interval |
| Sealing | IP67 |
| Body | diameter 21 mm × 16 mm, 20 g (sensor body, without the tee) |
| What it needs | a phone (iOS or Android) - the phone is the gauge |
Which valve you are dealing with
Fitment is a valve question first, a vehicle question second. Three cases cover almost every two-wheeler:
- Rubber snap-in valve on a tubeless wheel - the most common case. The sensor is a valve-stem cap: it screws onto the existing stem and nothing on the wheel changes.
- Metal clamp-in valve - common on larger or performance wheels. It also takes the cap sensor; check that the cap has clearance inside the rim.
- Tube-type wheel - a spoked wheel with an inner tube. A cap sensor reads the tube, not the air in the tyre directly, so readings react more slowly; the honest answer is that the wheel wants a different mounting, and it is worth asking before ordering.
What to check before ordering
- Rim clearance - with the sensor on the valve, does it clear the brake caliper and the fork at full travel?
- Valve condition - a cracked or bent stem leaks; replace it first, then fit.
- Wheel balance - 20 g on one side matters at sustained speed on a light motorcycle; on a scooter it usually does not.
- Pressure range - our range is 0–500 kPa gauge. Most two-wheeler tyres run well below that; the ceiling matters for air-shaft and industrial use, not for road tyres.
What the rider sees
Pressure and temperature per wheel on the phone, with the sensor's own battery state. The point is not a dashboard: it is seeing a slow leak before it becomes a roadside stop, and a temperature rise on a long climb before it becomes a tyre.
Want samples or a specification for your programme?
Tell us the vehicle, wheel count, where the data should go, and the label language for your market. We answer in writing.
Important, and we mean it. We are not affiliated with, authorised by, or an official supplier to any vehicle manufacturer named on this page. Our sensors are an aftermarket add-on: they fit the valve and communicate with our app, not with any factory TPMS receiver. Brand names are used only to describe which vehicles a sensor can be fitted to.
Related: Niu / Yadea · Vespa / Piaggio · TVS · all brands · the BPU100 sensor